Aegis IR: Rapid Infrastructure Incident Response That Restores Service Fast
A 24/7/365 US-based engineering team that plugs into your NOC, owns complex incidents end-to-end, and drives Mean Time to Resolution down when downtime is costing the business.
From a single failed circuit to a multi-fabric EVPN-VXLAN outage spanning on-prem and public cloud, Aegis IR acts as a disciplined extension of your team — triaging fast, executing under pressure, and managing every vendor escalation to resolution.
Infrastructure Incidents Don't Keep Business Hours
A circuit flap at 2 AM, an unresponsive core switch mid-quarter-close, a multi-fabric failure spanning public cloud — every minute of unresolved downtime compounds business impact. Your team can't afford to carry that pressure alone.
The engineer's dilemma
Most internal teams end up stretched between two failure modes at the same time: senior engineers burning cycles on routine issues, while the most complex incidents exceed what one team can realistically carry.
- Routine incidents drain your best talent from strategic work
- Complex multi-vendor outages overwhelm internal bandwidth
- Vendor TAC management consumes hours during active incidents
- After-hours coverage depends on a rotating on-call of exhausted engineers
- Inconsistent triage quality stretches MTTR and widens business impact
What Aegis IR changes
Aegis IR gives your organization a dedicated, US-based engineering team that operates as an extension of your NOC. We absorb the full incident surface — routine through catastrophic — and drive every response toward rapid service restoration and permanent resolution.
- 24/7/365 coverage by engineers, not dispatchers
- Full-spectrum support from circuit flaps to complex multi-fabric failures
- Single-point-of-contact vendor and carrier escalation management
- Pre-approved playbooks and disciplined execution under pressure
- Structured post-incident reporting and resolution follow-through
Full-Spectrum Incident Coverage, Engineered for Speed
Aegis IR is designed to cover the full range of operational incidents — the routine work that drains your team and the complex work that demands senior multi-vendor expertise.
24/7/365 US-Based NOC
Round-the-clock coverage from experienced engineers, not a dispatch desk. Every incident is triaged and acted on by someone qualified to own the technical response from the first minute.
Full-Spectrum Response
From basic circuit flaps and routine ticket work to complex multi-fabric EVPN-VXLAN failures, our engineers are equipped for the full incident surface so your team isn't forced to choose what to cover.
MTTR-Focused Action
Our primary mission during any incident is rapid service restoration. We leverage pre-approved playbooks and deep multi-vendor expertise to take decisive action — minimizing business impact while pursuing permanent resolution.
Vendor & Carrier Escalation
We own the entire escalation process — opening, driving, and closing TAC cases with your hardware OEMs and circuit carriers. You stop chasing case numbers; we stay on the call until service is restored.
Multi-Vendor Expertise
Deep technical experience across Cisco, Arista, Palo Alto Networks, Fortinet, AWS, Nutanix, and more. The NOC is staffed to handle the vendor mix that actually exists in enterprise environments today.
Incident Communication
Clear, consistent updates throughout the lifecycle of every incident. Your stakeholders stay informed, your leadership stays aligned, and your team is never left guessing about status.
Post-Incident Reporting
Every significant incident produces a structured summary — what happened, what actions were taken, what was resolved, and what is recommended to prevent recurrence. Incident intelligence becomes institutional knowledge.
Tight Integration With Aegis PM
When Aegis PM is deployed, IR starts every incident with rich, correlated telemetry. Alert context, MELT data, and environmental signal are in hand from the moment the NOC engages — meaningfully compressing diagnostic time.
A Disciplined Playbook From Detect to Resolve
Aegis IR follows a structured response model so every incident — routine or catastrophic — gets the same level of operational discipline. Speed without discipline creates rework; discipline without speed prolongs impact. We engineer for both.
Detect & Alert
An incident is detected through Aegis PM telemetry, direct customer notification, or vendor signal. Context-rich alerts arrive with the data needed to start the response process immediately rather than spend time gathering information.
Triage & Validate
Our 24/7 NOC validates the alert, confirms scope and business impact, and initiates the appropriate response path. False positives are filtered out; real incidents move immediately into active engineering ownership.
Engage & Coordinate
We engage your designated points of contact and begin active troubleshooting. On complex incidents, we coordinate across internal teams, hardware OEMs, and circuit carriers in parallel so no thread of the investigation stalls waiting on another.
Execute Remediation
Our engineers take hands-on action to restore service — executing playbooks, applying validated changes, driving vendor escalations, and coordinating workarounds when needed. The goal at this phase is always service restoration as fast as safely possible.
Communicate Throughout
Stakeholders receive consistent updates throughout the incident — progress, current hypothesis, next steps, and estimated time to resolution. Operational leadership is never left trying to reconstruct what happened from a thread of pings.
Resolve & Report
After service is restored, we close the loop with a post-incident report capturing what occurred, what actions were taken, root cause when known, and recommendations to reduce the likelihood of recurrence. Every incident is an opportunity to improve the estate.
Built for Any Organization Where Infrastructure Uptime Is Business-Critical
Aegis IR is designed for organizations that cannot absorb uncontrolled downtime — and whose internal teams need a force multiplier to handle the full incident spectrum at enterprise quality.
Lean IT & Network Operations Teams
Your team is strong but stretched. Aegis IR takes routine incident work off your plate and brings senior-level expertise to the complex incidents your team hasn't had the bandwidth to handle at full depth.
Distributed & 24x7 Enterprises
Your business runs outside of business hours. Aegis IR provides around-the-clock engineering coverage so incidents at 3 AM get the same quality of response as incidents at 3 PM.
Complex Multi-Vendor Environments
Your estate spans Cisco, Arista, Palo Alto, AWS, Nutanix and more, and no single team can be deep in everything. We bring the multi-vendor expertise the modern enterprise actually needs during an incident.
Operational Outcomes
Faster diagnosis and decisive action compress time to restoration during active incidents.
Your best engineers stop burning cycles on routine tickets and vendor TAC management.
Round-the-clock response without building an after-hours on-call rotation internally.
A single point of contact drives carriers and OEMs through escalation instead of your team.
Every incident, every shift, every day — the same disciplined playbook and response quality.
Post-incident reporting turns each event into improvement input for the broader estate.
Choose the Right Coverage Depth for Aegis IR
The right Aegis IR engagement depends on what's driving urgency today: after-hours coverage gaps, vendor escalation overhead, or the need for senior expertise on complex incidents.
Start With 24/7 NOC Coverage
Anchor the first wave on round-the-clock response so after-hours incidents stop being handled by an exhausted on-call rotation. Useful when the primary pain is coverage continuity, not incident complexity.
Full-Spectrum Incident Coverage
Cover the whole incident surface — routine through complex, business-hours through overnight, every vendor in the stack. Aegis IR becomes the operational layer for the entire incident lifecycle.
Complex-Incident & Multi-Fabric Focus
Focus Aegis IR on the incidents your team cannot absorb at depth — multi-fabric failures, cloud-networking outages, large-scale vendor escalations — while routine work continues internally.
Frequently Asked Questions
Common questions from infrastructure and operations leaders evaluating Aegis Incident Response & Remediation.
What is Aegis IR?
Aegis IR is a co-managed infrastructure incident response service delivered by a 24/7/365 US-based engineering team. When hardware, circuits, cloud services, or servers fail or degrade, Aegis IR provides the expert response needed to triage fast, restore service, and drive every incident to permanent resolution.
What types of incidents does Aegis IR handle?
The service is built for the full range of operational infrastructure incidents — network device outages, server and hardware failures, circuit and carrier outages, storage system failures, performance-degradation events that trigger critical alerts, and environmental alerts affecting hardware. Coverage runs from basic circuit troubleshooting through complex multi-fabric EVPN-VXLAN failures.
How does the response process work when an incident occurs?
An incident is detected through Aegis PM telemetry or direct customer alert, validated by the NOC, assigned to an engineer, and driven through active remediation with continuous stakeholder communication. On complex incidents we coordinate across internal teams, OEMs, and carriers in parallel. Every event closes with a post-incident report documenting what happened and what was recommended next.
Is your NOC staffed by engineers or dispatchers?
Engineers. The Aegis NOC is a working technical operations center, not a Tier-1 dispatch desk. Incidents are handled by people qualified to own the technical response from the first minute — that's the whole point of the service.
Do you manage vendor TAC cases and carrier escalations?
Yes. Vendor and carrier escalation management is a core part of the service. We open, drive, and close TAC cases on your behalf and manage carrier tickets through to resolution. Your team stops losing hours to escalation overhead during active incidents.
How is Aegis IR different from traditional break/fix support?
Break/fix typically starts after you've already diagnosed a problem and opened a case. Aegis IR is a continuous operational partnership. We participate in detection, triage, and remediation from the start, and we own vendor escalations throughout. The model is engineered to compress MTTR, not just to answer tickets.
How does Aegis IR work with Aegis PM?
Aegis PM is the detection and telemetry layer; Aegis IR is the response layer. When paired, every IR engagement begins with correlated MELT data already in hand — metrics, events, logs, and traces — which meaningfully compresses diagnostic time and helps engineers take decisive action earlier in the incident lifecycle.
Do we lose control of our infrastructure under Aegis IR?
No. The model is co-managed by design. Your team retains governance, change authority, and full visibility into incident activity. Aegis IR operates as a disciplined extension of your NOC under your escalation and approval structures — we drive execution, you retain control.
How does Aegis IR integrate with our ITSM tools?
The service is designed to integrate with the ITSM platforms enterprises already use — ServiceNow, Jira, and similar systems — so incidents, updates, and resolution artifacts flow through your system of record. Your team maintains a single source of truth for incident activity.
How do we get started with Aegis IR?
Start by talking to an IVI managed service expert. We'll review your current operational model, incident patterns, and coverage gaps, then recommend the right Aegis IR engagement depth for your organization.